國立中央大學企業管理學系 Department of Business Administration

專任教師

專任教師 兼任教師 行政人員
張東生 教授

張東生 教授

  • 學歷 國立台灣科技大學工業管理博士
  • 專長 品質管理、作業管理、作業研究、科技管理
  • 授課科目 統計學、數量方法 、結構方程模式專題、生產與作業管理研究專題、企業績效評估
  • 研究室 I1-710
  • 分機 03-422-7151#66124
  • E-mail changds@mgt.ncu.edu.tw

服務機構/部門 職稱 起迄日
National United University／管理學院 院長 2005/8/~2007/7/
University of Victoria, BC, Canada／Faculty of Business Visiting Scholar 2000/9/~2000/6/
Louisiana State Univ. Baton Rouge, U.S.A／Dept. of Information Systems and Decision Sciences, E.J. Ourso College of Business Visiting Professor 1997/9/~1998/1/
National Central University／工業管理研究所 所長 1994//~1997//
National Central University／Department of Business Administration Professor 1993/8/~0/0/
National Central University／Department of Business Administration Chairman 1993/11/~1996/7/
Cornell University, USA／School of Operations Research & Industrial Eng. Visiting Scientist 1991/9/~1991/8/
TECO,Taipei／ Industrial Engineer 1979/10/~1980/1/

  1. Li-Ting Yeh and Dong-Shang Chang (2019), "Using Categorical DEA to Assess the Effect of Subsidy Policies and Technological Learning on R&D Efficiency of IT industry. ", Technological and Economic Development of Economy , 26, pp.311-330, (2019 SSCI),
  2. Jiun-Yi Shiu, Shih- Tong Lu, Dong-Shang Chang and Kai-Wei Wu (2019), "Fuzzy Multicriteria Decision‐Making Tools for Selecting a Professional Property Management Company ", International Transactions in Operational Research , 26, pp.1527-1557, (2019 SSCI),
  3. Dong-Shang Chang, Kun-Ping Cheng, Rouwen Wang (2018), "Developing Low Temperature Recovery Technology of Waste Heat in Automobile Factory", Energy Science & Engineering, 1, pp.1-15, (2018 SCI),
  4. Chao-Chan Wu,Dong-Shang Chang,Rouwen Wang (2018), "Identifying Key Factors of Adopting an RFID System in Nursing Care Using DEMATELBased ANP", Corporate Management Review, 38(1), pp.63-98, (2018 TSSCI),
  5. Dong-Shang Chang, Jun-Der Leu, Wen-Sheng Wang and Yi-Chun Chen (2018), "Improving Waiting Time for Surgical Rooms Using Workflow and the Six-Sigma Method", Total Quality Management & Business Excellence, on-line, pp.1-19, (2018 SSCI IF=1.368),
  6. Dong-Shang Chang, Yihsu Chen, Yen-Chen Tsai (2018), "How Injury Incidence Is Associated with Business Cycle? Empirical Evidence from Taiwan", Safety Science, 110, pp.235-248, (2018 SCI),
  7. Chih Tung Hsiao, Chung-Shu Liu, Dong-Shang Chang, Chun-Cheng Chen (2018), "Dynamic Modeling of the Policy Effect and Development of Electric Power Systems: A Case in Taiwan", Energy Policy, 122, pp.377-387, (2018 SSCI),
  8. Dong-shang, Chang, Wen-Sheng, Wang, Rouwen Wang (2017), "Identifying Critical Factors of Sustainable Healthcare Institutions’ Indicators Under Taiwan’s National Health Insurance System", Social Indicators Research, online, pp.1-21, (2017 SSCI IF=1.743),
  9. Dong-Shang Chang, Shu-Ming Liu, Yi-Chun Chen (2017), "Applying DEMATEL to assess TRIZ’s inventive principles for resolving contradictions in the long-term care cloud system", Industrial Management & Data Systems, 117(6), pp.1244-1262, (2017 SCI IF=2.205),
  10. Chia-Wei, Hsu, Dong-Shang, Chang (2017), "Investigating critical organizational factors toward sustainability index:Insights from the Taiwanese electronics industry", Business Ethics-A European Review, 26(4), pp.468-479, (2017 SSCI IF=1.906),
  11. Chih-Tung Hsiao, Dong-Shang Chang, Shu-Ming Liu (2016), "Complex relationships among firm risk, asymmetric volatility, volatility skew, and the leverage effect", COMPLEXITY, 21(2), pp.329–341, (2016 SCI IF=4.621),
  12. Meng Hong Lee, Dong-Shang Chang (2016), "Allocative efficiency of high-power Li-ion batteries from automotive mode (AM) to storage mode (SM) ", RENEWABLE & SUSTAINABLE ENERGY REVIEWS , 64, pp.60-67, (2016 SCI IF=8.050),
  13. Li-Ting Yeh, Dong-Shang Chang and Wenrong Liu (2016), "The effect of organizational learning on the dynamic recycling performance of Taiwan’s municipal solid waste (MSW) system ", Clean Technologies and Environmental Policy, 18(5), pp.1535-1550, (2016 SCI IF=3.331),
  14. Dong-Shang Chang, Shun-Te Lai (2016), "Develop a novel unified interface design on automation transportation system in LCD industry", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88(5-8), pp.2097-2108, (2016 SCI IF=2.209),
  15. Jiun-Yi Shiu, Shih- Tong Lu, Dong-Shang Chang, Kai-Wei Wu (2016), "Fuzzy multicriteria decision‐making tools for selecting a professional property management company ", International Transactions in Operational Research , online, pp.1-31, (2016 SCI IF=1.745),
  16. Dong-Shang Chang, Sheng-Hung Chen, Chia-Wei Hsu, Allen H. Hu and Gwo-Hshiung Tzeng (2015), "Evaluation Framework for Alternative Fuel Vehicles: Sustainable Development Perspective", Sustainability, 7(9), pp.11570-11594, (2015 SCI IF=1.343),
  17. Chung-Shu Liu, Chih-Tung Hsiao, Dong-Shang Chang, and Cheng-Hsing Hsiao (2015), "How the European Union's and the United States' Anti-dumping Duties Affect Taiwan's PV Industry: A Policy Simulation", Renewable & Sustainable Energy Reviews, 53, pp.296-305, (2015 SCI IF=5.901),
  18. Dong-Shang Chang, Sheng-Hung Chen, Chia-Wei Hsu and Allen H. Hu (2015), "Identifying Strategic Factors of the Implantation CSR in the Airline Industry: The Case of Asia-Pacific Airlines", Sustainability, 7(6), pp.7762-7783, (2015 SCI IF=1.343),
  19. Dong-Shang Chang and Shun Te Lai (2015), "Implementation of cross-generation automation transportation system in the TFT-LCD industry", International Journal of Advanced Manufacturing Technology, 78(5), pp.753-763, (2015 SCI IF=1.458),
  20. Dong-Shang Chang*, Li-Ting Yeh and Wenrong Liu (2015), "Incorporating the carbon footprint to measure industry context and energy consumption effect on environmental performance of business operations", Clean Technologies and Environmental Policy, 17, pp.359-371, (2015 SCI IF=1.934),
  21. Wen-Rong Liu, Dong-Shang Chang and Li-Ting Yeh (2014), "Earnings management, competition and cooperative banks' risk-taking: International evidence", Actual Problems of Economics, 153(3), pp.183-193, (2014 SSCI IF=0.039),
  22. Dong-Shang Chang* and Yen-Chen Tsai (2014), "Investigating the long-term change of injury pattern on severity, accident types and sources of injury in Taiwan's manufacturing sector between 1996 and 2012", Safety Science, 68, pp.231-242, (2014 SCI IF=1.831),
  23. Shih-Tong Lu, Shih-Heng Yu, Dong-Shang Chang (2014), "Using fuzzy multiple criteria decision-making approach for assessing the risk of railway reconstruction project in Taiwan", The Scientific World Journal, 2014, pp.1-14, (2014 SCI IF=1.219),
  24. Dong-Shang Chang*, Wenrong Liu and Li-Ting Yeh (2013), "Incorporating the learning effect into data envelopment analysis to measure MSW recycling performance ", European Journal of Operational Research, 229(2), pp.496-504, (2013 SCI IF=2.038),
  25. Dong-Shang Chang*, Li-Ting Yeh and Yong-fu Chen (2013), "The Effects of Economic Development, International Trade, Industrial Structure and Energy Demands on Sustainable Development", Sustainable Development, Online, pp.1-14, (2013 SSCI IF=1.884),
  26. Shih-Tong Lu, Shih-Heng Yu, Dong-Shang Chang and Shih-Chang Su (2013), "Using the Fuzzy Linguistic Preference Relation Approach for Assessing the Importance of Risk Factors in a Software Development Project", Mathematical Problems in Engineering, online, pp.1-10, (2013 SCI IF=1.383),
  27. Yi-Tui Chen, Dong-Shang Chang, Chia-Yon Chen and Chu-Chieh Chen (2012), "The Policy Impact on Clean Technology Diffusion", Clean Technologies and Environmental Policy, 14(4), pp. 699-708, (2012 SCI IF=1.827),
  28. Dong-Shang Chang, Jenq-Hann Chung, Kuo-Lung Sun and Fu-Chiang Yang (2012), "A Novel Approach for Evaluating the Risk of Health Care Failure Modes", Journal of Medical Systems, 36(6), pp. 3967-3974, (2012 SCI),
  29. Dong-Shang Chang and Jenq-Hann Chung (2012), "Risk Evaluation of Group Package Tour Service Failures that Result in Third-Party Complaints", Journal of Travel & Tourism Marketing, 29(8), pp.817-834, (2012 SSCI),
  30. Dong-Shang Chang and Chia-Chun Liao (2012), "Identifying the Key Factors for Chiller System Collaborative Service Design", Energy and Buildings, 49, pp. 286-293, (2012 SCI),
  31. Dong-Shang Chang and Tao-Hsing Wang (2012), "Consumer Preferences for Service Recovery Options after Delivery Delay when Shopping Online", Social Behavior and Personality, 40(6), pp. 1033-1044, (2012 SSCI),
  32. Dong-Shang Chang and Chia-Chun Liao (2011), "Evaluating the Collaborative Service Performance in TFT-LCD Chiller", Advances in Information Sciences and Service Sciences, 3(4), pp. 127-131,
  33. Dong-Shang Chang and Fu-Chiang Yang (2011), "Assessing the Power Generation, Pollution Control, and Overall Efficiencies of Municipal Solid Waste Incinerators in Taiwan", Energy Policy, 39(2), pp. 651-663, (2011 SSCI),
  34. Shih-Tong Lu, Dong-Shang Chang, Yao-Feng Chang and Junzo Watada (2011), "Evaluation Criteria Analysis in Selecting an Online Securities Trading System by Brokerage Firms in Taiwan", ICIC Express Letters- An International Journal of Research and Surveys, 5(11), pp. 4033-4040,
  35. Dong-Shang Chang, Li-chin Regina Kuo and Yi-tui Chen (2011), "Industrial Changes in Corporate Sustainability Performance - An Empirical Overview Using Data Envelopment Analysis", Journal of Cleaner Production, (2011 SCI),
  36. 張東生(Dong-Shang Chang)、楊翔莉(Shiang-Li Yang) (2010), "應用聯合分析探討遊客對文化產業活動之選擇偏好", 顧客滿意學刊, 6(1), pp. 125-146,
  37. Yi-Tui Chen and Dong-Shang Chang (2010), "Diffusion Effect and Learning Effect: an Examination on MSW Recycling", Journal of Cleaner Production, 18(5), pp. 496-503, (2010 SCI),
  38. 陳依兌(Yi-Tui Chen)、張東生(Dong-Shang Chang) (2010), "A Pricing Strategy in a Conservative Park", 管理研究學報, 10, pp. 71-92,
  39. Dong-Shang Chang and Fu-Chiang Yang (2010), "A New Benchmarking Method to Advance the Two-Model DEA Approach: Evidence from a Nursing Home Application", Information Systems and Operational Research(INFOR), 48(2), pp. 77-88, (2010 SCI),
  40. Dong-Shang Chang, Fu-Chiao Chyr and Fu-Chiang Yang (2010), "Incorporating a Database Approach into the Large-scale Multi-level Lot Sizing Problem", Computers and Mathematics with Applications, 60(9), pp. 2536-2547, (2010 SCI),
  41. Dong-Shang Chang, Fu-Chiao Chyr and Fu-Chiang Yang (2010), "Determining the Adaptive Decision Zone of Discrete Lot Sizing Model with Changes of Total Cost", Expert Systems With Applications, 37(10), pp. 6753-6763, (2010 SCI),
  42. Ming-Yeu Wang, Dong-Shang Chang and Chih-Hsi Kao (2010), "Identifying Technology Trends for R&D Planning Using TRIZ and Text Mining", R&D Management, 40(5), pp. 491-509, (2010 SSCI),
  43. Dong-Shang Chang and Shiang-Li Yang (2010), "Stabilizing Overall Yield for Attributes-type Multiple Quality Characteristics Production", Journal of Information and Optimization Sciences, 31(3), pp. 573-586,
  44. Dong-Shang Chang and Kuo-Lung Paul Sun (2009), "Applying DEA to Enhance Assessment Capability of FMEA", International Journal of Quality and Reliability Management, 26(6), pp. 629-643,
  45. 張東生(Dong-Shang Chang)、王明妤(Ming-Yeu Wang)、高志昕(Chih-Hsi Kao) (2009), "發展多重對應關係之技術專利地圖：以薄膜太陽能電池為例", 科技管理學刊, 14(3), pp. 109-138,
  46. 曹壽民(Shou-Min Tsao)、張東生(Dong-Shang Chang)、郭博文(Po-Wen Kuo)、歐曜薪(Iau-Shin Ou) (2009), "生命週期、分析師預測與現金增資偏低訂價", 管理學報, 26(3), pp. 255-273,
  47. 陳文典(Wen-Den Chen)、陳依兌(Yi-Tui Chen)、張東生(Dong-Shang Chang)、林慧芳(Hwei-Fang Lin) (2009), "結構改變下Black-Scholes與Hull-White評價模型之應用－以台灣股價指數選擇權為例", 中華管理學報, 10(1), pp. 93-106,
  48. 陳文典(Wen-Den Chen)、陳依兌(Yi-Tui Chen)、張東生(Dong-Shang Chang) (2009), "外資比例對銀行的績效影響研究", 環境與管理研究, 10(2), pp. 88-101,
  49. Dong-Shang Chang, Yi-Tui Chen and Wen-Den Chen (2009), "The Exogenous Factors Affecting the Cost Efficiency of Power Generation", Energy Policy, 37(12), pp. 5540-5545, (2009 SSCI),
  50. Dong-Shang Chang, Hsuan-Yueh Chen, Chin-Tsang Ho and Iuan-Yuan Lu (2009), "Development of Competency Model for Quality Specialists", International Journal of Management and Enterprise Development, 7(1), pp. 65-85,
  51. Dong-Shang Chang and Yi-Chun Kuo (2008), "An Approach for the Two-Group Discriminant Analysis: An Application of DEA", Mathematical and Computer Modelling, 47, pp. 970-981, (2008 SCI),
  52. Dong-Shang Chang, Yi-Chun Kuo and Tz-Yu Chen (2008), "Productivity Measurement of the Manufacturing Process for Outsourcing Decisions: the Case of a Taiwanese Printed Circuit Board Manufacturer", International Journal of Production Research, 46(24), pp. 6981-6995, (2008 SCI),
  53. Dong-shang Chang and Li-chin Regina Kuo (2008), "The Effects of Sustainable Development on Firms' Financial Performance - An Empirical Approach", Sustainable Development, 16(6), pp.365-380, (2008 SSCI),
  54. 陳玄岳(Hsuan-Yueh Chen)、劉永欽(Yong-Chin Liu)、曹壽民(Shou-Min Tsao)、張東生(Dong-Shang Chang) (2007), "全國型品質獎宣告對股價與企業風險的影響", 品質學報, 14(3), pp. 235-249,
  55. Dong-Shang Chang and Kuo-Lung Suna (2007), "Exploring the Correspondence between Total Quality Management and Peter Senge's Disciplines of a Learning Organization: A Taiwan Perspective", Total Quality Management & Business Excellence, 18(7), pp. 807-822, (2007 SSCI),
  56. Liang-Kang Lo and Dong-Shang Chang (2007), "The Difference in the Perceived Benefits between Firms That Maintain ISO Certification and Those That Do not", International Journal of Production Research, 48(5), pp. 1881-1897, (2007 SCI),
  57. 張東生(Dong-Shang Chang)、郭博文(Po-Wen Kuo) (2007), "發展經濟附加價值與相對效率矩陣評估企業經營績效-以資訊電子業為例", 產業與管理論壇, 9(1), pp. 57-78,
  58. 張東生(Dong-Shang Chang)、謝志光(Chih-Kuang Hsieh)、沈瑞程(Jui-Cheng Shen) (2007), "半導體零組件通路商相對經營績效變遷與標竿學習", 產業管理評論, 2(1), pp. 38-48,
  59. 張東生(Dong-Shang Chang)、王道行(Tao-Hsing Wang) (2006), "網路購物電子履約過程的消費者偏好分析", 電子商務研究, 4(3), pp. 345-370,
  60. 曹壽民(Shou-Min Tsao)、張東生(Dong-Shang Chang)、郭博文(Po-Wen Kuo)、溫政斌(Cheng-Bin Wen) (2006), "暫時性盈餘屬性之研究", 當代會計, 7(1), pp. 1-30,
  61. Dong-Shang Chang and Yi-Chun Kuo (2005), "A Novel Procedure to Identify the Minimized Overlap Boundary of Two Groups by DEA Model", Lecture Notes in Computer Science, 3483, pp. 577-586, (2005 SCI),
  62. 張東生(Dong-Shang Chang)、王駿旻(Chun-Min Wang) (2005), "具有服務嵌入功能之資訊組合產品的二維狀態品牌轉行為影響因素之研究-以行動電話為例", 產業與管理論壇, 7(4), pp. 41-64,
  63. Dong-Shang Chang and Liang-Kang Lo (2005), "Measuring the Relative Efficiency of a Firm’s Ability to Achieve Organization Benefit after ISO Certification", Total Quality Management & Business Excellence, 16(1), pp.57-69, (2005 SSCI),
  64. Kwei Tang, Linguo Gong and Dong-Shang Chang (2003), "Optimal Process Control Policies Under a Time-Varying Cost Structure", European Journal of Operational Research(EJOR), 149(1), pp. 197-210, (2003 SCI),
  65. 羅良岡(Liang-Kang Lo)、張東生(Dong-Shang Chang) (2003), "探討廠商ISO驗證後之持續性作法對其組織效益之因果關係", 管理與系統, 10(3), pp. 285-302,
  66. 張東生(Dong-Shang Chang)、廖振谷(Jen-Gu Liau) (2003), "台灣地區生技與製藥產業相對經營效率動態分析", 產業與管理論壇, 5(2), pp. 1-22,
  67. Dong-Shang Chang and Shwu-Tzy Jiang (2002), "Assessing Quality Performance Based on the On-line Sensor Measurements Using Neural Networks", Computers and Industrial Engineering, 42, pp. 417-424, (2002 SCI),
  68. Dong-shang Chang, Kwei Tang and Chien-Wei Lai (2000), "Sensor-based on Line Screening Procedure and Tool Replacement Policy", International Journal of Management Theory and Practices, 1(1), pp. 65-77,
  69. 張東生(Dong-shang Chang)、曾國強(Kuo-chiang Tseng) (2000), "利用融入價值判斷之資料包絡分析模式衡量台灣地區公共安全品質", 管理與系統, 7(3), pp. 283-304,
  70. Dong-shang Chang (2000), "Optimal Burn-in Decision for Products with an Unimodal Failure Rate Function", European Journal of Operational Research(EJOR), 126(3), pp. 83-89, (2000 SCI),
  71. Dong-shang Chang, Chih-Chou Chiu and Shwu-Tzy Jiang (1999), "Modeling and Reliability Prediction for the Step-stress Degradation Measurements Using Neural Networks Methodolgy", International Journal of Reliability, Quality and Safety Engineering, 6(3), pp. 277-288,
  72. Ming-Che Lu and Dong-shang Chang (1997), "Bootstrap Prediction Intervals for the Birnbaum-Saunders Distribution", Microelectronics Reliability, 37(8), pp. 1213-1216, (1997 SCI),
  73. Dong-shang Chang (1995), "Reliability Bounds for the Stress-Strength Model", Computers & Industrial Engineering, 29, pp. 15-19, (1995 SCI),
  74. Loon-Ching Tang and Dong-shang Chang (1995), "Reliability Prediction Using Nondestructive Accelerated-degradation Data: Case Study on Power Supplies", IEEE Trans. Reliability, 44(4), pp. 562-566, (1995 SCI),
  75. Loon-Ching Tang and Dong-shang Chang (1994), "Confidence Intervals for the Critical Time of the Inverse Gaussian Failure Rate", International Journal of Reliability, Quality and Safety Engineering, 1(3), pp. 379-390,
  76. Dong-shang Chang and Loon-Ching Tang (1994), "Random Number Generator for the Bimbaum-Saunders Distribution", Computers & Industrial Engineering, 27, pp. 345-348, (1994 SCI),
  77. Dong-shang Chang and Loon-Ching Tang (1994), "Percentile Bounds and Tolerance Limits for the Birnbaum-Saunders Distribution", Communications in Statistics - Theory and Methods, 23(10), pp. 2853-2863, (1994 SCI),
  78. Loon-Ching Tang and Dong-shang Chang (1994), "Reliability Bounds and Tolerance Limits of Two Inverse Gaussian Models", Microelectronics Reliability, 34(2), pp.247-259, (1994 SCI),
  79. Dong-shang Chang (1994), "Critical Time of the Lognormal Distribution", Microelectronics Reliability, 34(2), pp. 261-266, (1994 SCI),
  80. Dong-shang Chang and Loon-Ching Tang (1994), "Graphical Analysis for the Birnbaum-Saunders Distribution", Microelectronics Reliability, 34(1), pp. 17-22, (1994 SCI),
  81. Dong-shang Chang (1994), "A Note on Constructing the Confidence Bounds of the Failure Rate for the Inverse Gaussian Distribution", Microelectronics Reliability, 34(1), pp.187-190, (1994 SCI),
  82. Loon-Ching Tang and Dong-shang Chang (1994), "Tolerance Limits for Inverse Gaussian Distribution", Journal of Statistical Computation and Simulation, 51(1), pp. 21-29, (1994 SCI),
  83. Dong-shang Chang and Loon-Ching Tang (1993), "Reliability Bounds and Critical Time of the Birnbaum-Saunders Distribution", IEEE Trans. Reliability, 42(3), pp. 464-469, (1993 SCI),
  84. Dong-Shang Chang and Raykun R. Tan (1993), "Confidence Bounds of the Weibull Failure Rate", Computers & Industrial Engineering, 25, pp. 5-8, (1993 SCI),
  85. Raykun R. Tan and Dong-Shang Chang (1993), "The Formulation of Performance Indicators in Evaluating the Implementation of Automation in the Constriction Industry", Construction Management and Economics, 11(5), pp. 398-403,
  86. Dong-shang Chang and Ching-Shih Tsou (1993), "A Chance-constraints Linear Programming Model on the Economic Evaluation of Flexible Manufacturing System", Production Planning and Control, 4(2), pp. 159-165, (1993 SCI),
  87. Chen, Y.M. and Dong-Shang Chang (1993), "A Simulation Evaluation of Ranking Effect on Reliability Estimation", Journal of Quality, 1(1), pp. 85-92,
  88. Dong-shang Chang (1993), "Analysis of Accelerated Degradation Data in a Two-way Design", Reliability Engineering & System Safety, 39(1), pp. 65-69, (1993 SCI),
  89. Dong-Shang Chang, Deng-Yuan Huang and Sheng-Tsaing Tseng (1992), "Selecting the Most Reliable Design under Type-II Censored Accelerated Testing", IEEE Trans. Reliability, 41(4), pp. 588-592, (1992 SCI),
  90. Chang, D.S., W. Chen and C.S. Tsou (1990), "Building a Forecasting Procedure for Blood Donation Center", China Medical College Research Annual Bulletin, pp. 510-535,
  91. Sheng-Tsaing Tseng and Dong-Shang Chang (1989), "Selecting the Most Reliable Design under Type-II Censoring", Reliability Engineering and System Safety, 25(2), pp. 147-156, (1989 SCI),
  92. 張東生 (1985), "廣告促銷效果之計量經濟測定", 東吳經濟商學學報, 6, pp. 165-203,

  1. 張東生、葉俐廷、鄭維憫(2012), "國際貿易與能源政策對碳足跡與國內生產總額的影響", 2012 Conference on Advanced Management and Industry Trends, (台灣,聯合大學),
  2. Yeh, L.T., Chang, D.S. and Liu, W.R.(2012), "Developing the Data Envelopment Analysis Model with Incorporating the Carbon Footprint to Measure the Business Operational Efficiency", Euro XXV International Conference, (Lithuania,Vilnius),
  3. Chang, D.S.(2012), "A Novel Approach for Evaluating the Risk of Health Care Failure Modes", 23th Annual Conference of Production and Operations Management Society, (U.S.A,Chicago),
  4. Lu, S.T., Lin, C.W. and Chang, D.S.(2012), "The Evaluation Criteria for Recruiting Local Staffs by Taiwanese Enterprise", International Symposium of Management Engineering, (Japan,Kitakyushu),
  5. Chen, Y.T., Chang D.S., Chen, C.Y. and Chen, C.C.(2011), "The Policy Impact on Clean Technology Diffusion", IEEE International Technology Management Conference, (U.S.A,California),
  6. Huang, C.T., Lu, S.T. and Chang, D.S.(2011), "The Analysis of Evaluation Criteria for of Security Firms in Taiwan Based on Fuzzy Linguistic Preference Relation Approach", Asia-Pacific Business Innovation and Technology Management, (China,Dalian),
  7. Chang, D.S. and Chung, J.H. (2011), "Risk Ranking of GPT Service Failures Resulting in Third-Party Complaints", 19th Triennial Conference of the International Federation of Operational Research Societies, (Australia,Melbourne),
  8. Chang, D.S. and Kuo, L.C. (2011), "Industrial Changes in Corporate Sustainability Performance–An Empirical Overview Using Data Envelopment Analysis", 17th Annual International Sustainable Development Research Conference, (U.S.A,New York),
  9. Chang, D.S. and Liao, C.C. (2011), "Expert System for Multi-Criteria Decision-Making to Assess the Collaboration Commerce System", The 2nd International Conference on Next Generation Information Technology, (Korea,),
  10. Chang, D.S. and Hsieh, C.K. (2010), "Investigating the Service Quality of Wireless Broadband Internet Applications in Taiwan: Consumer’s Viewpoint", IEEE 6th International Conference on Service Systems and Service Management, (Japan,Tokyo),
  11. Chang, D.S. and Yang, F.C. (2010), "Data Envelopment Analysis with Two Distinct Objectives of Inputs or Outputs", The 14th World Multi-Conference on Systemics, Cybernetics and Informatics ( The 6th International Symposium on Management, Engineering and Informatics: MEI 2010), ( U.S.A ,Orlando),
  12. Chang, D.S. and Yang, S.L. (2010), "Combining Kano model and Service Blueprint for Adult Day Care Service- A Case Study in Taiwan", IEEE 6th International Conference on Service Systems and Service Management, (Japan,Tokyo),
  13. Chang, D.S. and Kao, C.H. (2009), "Developing a Novel Patent Map to Explore R&D Directions and Technical Gaps for Thin-film Photovoltaic Industry", IEEM International Conference, (China,Hongkong),
  14. Chang, D.S., Chyr, F.C. and Yang, F.C.(2009), "A Flexible Decision Region of Dynamic Lot Size: A Phenomenon Resembling EOQ Zone", The 20th Annual Conference on Production and Operations Management, ( U.S.A ,Orlando),
  15. 蔡衍真、丁立文、張東生(2008), "部門別安全績效評估與診斷 部門特質塑造異常事故型態", 行政院勞工委員會99年職業安全衛生技術與實務研討會, (台灣,台大醫院國際會議中心),
  16. 張東生、謝志光、謝戎峰、李憶萱(2008), "以自然主義調查法探索使用者觀點之無線寬頻服務品質", 2008服務創新與應用研討會, (台灣,國立台北科技大學),
  17. Chang, D.S., Chyr, F.C. and Yang, F.C.(2008), "Solving the Unconstrained Multi-level Dynamic Lot Sizing Problem with a Database", The Third World Conference on Production and Operations Management, (Japan,Tokyo),
  18. Chang, D.S.(2007), "考慮誤判成本之非對稱層別化資料包絡分析在二群體分類上之應用", 95年度國科會工業工程與管理學門專題研究計畫成果研討會, (,),
  19. Chang, D.S., Kuo, Y.(2007), "An Asymmetric-Stratified Data Envelopment Analysis for Bankruptcy Prediction Problem", Euro XXII International Conference, (Czech,Prague),
  20. Chang, D.S., Kuo, Y., Kuo, P. and Chen, T.(2006), "Using Data Envelopment Analysis for Outsourcing Decision: A Case of Taiwan PCB Manufacturer", The 36th International Conference on Computers and Industrial Engineering, (Taiwan,Taipei),
  21. Chang, D.S.(2005), "Applying Stratification of Data Envelopment Analysis for Two-group Discriminant Problem", 93年度國科會工業工程與管理學門專題研究計畫成果研討會, (,),
  22. Chang, D.S. and Kuo, Y.C.(2005), "A Variable Benchmark Approach for the Two-Group Discriminant Problem", 17th Triennial Conference of the International Federation of Operational Research Societies, ( U.S.A ,Hawaii),
  23. Chang, D.S. and Kuo, Y.C.(2005), "A Novel Procedure to Identify the Minimized Overlap Boundary of Two Groups by DEA Model", International Conference on Computational Science and Its Applications, (Singapore,),
  24. 張東生(2004), "衡量垂直分工生產體系之相對效率", 92年度國科會工業工程與管理學門專題研究計畫成果研討會, (,),
  25. 張東生(2003), "探討廠商驗證後之持續性作法對其組織效益之因果關係", 91年度國科會工業工程與管理學門專題研究計畫成果研討會, (,),
  26. Chang, D.S.(2002), "Mean Residual Life for the Lognormal Distribution", 90年度國科會工業工程與管理學門專題研究計畫成果研討會, (,),
  27. 張東生(2001), "利用潛在投入與產出變量提昇資料包落分析模式之區別能力", 89年度國科會管理二學門專題研究計畫成果研討會, (,),
  28. 張東生、曾國強(2000), "利用融入價值判斷之資料包絡分析模式衡量台灣地區公共安全品質", 決策分析方法與應用研討會論文集, (,),
  29. 朱容樂、楊俊文、張東生(1999), "探討跨產業技術創新產品之競爭策略分析-以DVD產品為例", 中華民國科技管理研討會, (,),
  30. 張東生、連華錦(1999), "工作特性、工作滿足與領導型態對汽車銷售營業所之相對經營效率影響", 第一屆服務業績效管理研討會, (,),
  31. Chang, D.S. and Jiang, S.T.(1999), "Assessing Quality Performance Based on On-line Sensor Measurements Using Neural Networks", 26th International Conference of Computer and Industrial Engineering, (Australia,Melbourne),
  32. Chang, D.S., Tang, K. and Lai, C.W.(1998), "Predicting Quality Performance Based on On-line Sensor Measurements", Quantitative Management Techniques and Application in Taiwan Conference, (,),
  33. Chang, D.S., Chiu, C.C. and Jiang, S.T.(1998), "Modeling and Reliability Prediction for the Step-stress Degradation Measurements", International Workshop on Reliability Modeling and Analysis -From Theory to Practice, (Singapore,),
  34. Chang, D.S., Lu, M.J. and Yang, S.(1998), "Birnbaum-Saunders Control Chart Based on a Bootstrap Scheme", Fourth ISSAT International Conference on Reliability and Quality in Design, ( U.S.A ,Seattle),
  35. 張東生、周文才(1997), "衡量台灣地區商業自動化之技術擴散---以EDI為例", 中華民國科技管理論文研討會, (,),
  36. 張東生、莊雅莉(1997), "台灣地區公共安全品質之衡量", 海峽兩岸管理科學學術研討會, (,),
  37. Chiu, C.C., Chang, D.S. and Su, C. T.(1997), "Utilization of Neural Networks Model and Box-Jenkins Methodology in Prediction the Reliability of Degradation Measurements", Chinese Institute of Industrial Engineers National Conference, (,),
  38. Chiu, C. C. and Chang, D. S.(1997), "Utilization of Neural Network Models in Reliability Prediction Based on Degradation Measurements", Four International Applied Statistics in Industry Conference, (Missouri,Kansas),
  39. Chang, D.S., Lu, M. C. and Yang, S. F. (1997), "Birnbaum-Saunders Centrality Control", 1997 CSQC Conference and the Asia Quality Symposium, (,),
  40. 張東生、廖建安(1996), "衡量商業銀行服務品質之相對效率", 第二屆全國品質管理研討會, (,),
  41. Chang, D.S.(1996), "Reliability Prediction Based on Accelerated Degradation Testing Model with Step-stress", XIV World Conference on Operational Research, (Canada,Vancouver),
  42. Chang, D.S. and Su, S.J. (1996), "Cost Optimized Burn-in Model for the Failure rate with Critical Time", 20th International Conference on Computers and Industrial Engineering, (Korea,),
  43. 張東生、周文才(1995), "衡量跨組織性技術之擴散分析架構", 中華民國科技管理研討會, (,),
  44. Chang, D.S.(1995), "Measuring the Business Value of Automated Supermarkets", 1995 Annual International Conference on Industry, Engineering and Management Systems, (,),
  45. Chang, D.S., Lu, M.C. and Chen, W.D. (1995), "Evaluating Scale Economics Impact of Commerce Automation on Retail Trade in Taiwan", IEEE Annual Engineering Management Conference, (Singapore,),
  46. 張東生、林宏長(1994), "企研所專業教育之服務滿意度衡量--公私立大學研究生之觀點", 第六屆中華民國管理教育研討會, (,),
  47. Chang, D.S.(1994), "Reliability Bounds and Critical Time for the Bernstein Distribution", ISSAT International Conference on Reliability and Quality in Design, ( U.S.A ,Boston),
  48. Chang, D.S.(1994), "Random Number Generator for the Bimbaum-Saunders Distribution", 16th International Conference on Computers and Industrial Engineering, (Japan,),
  49. 譚瑞琨、張東生(1993), "商業自動化的成效衡量", 中華民國第六屆全國自動化科技研討會, (,),
  50. Tang, L.C. and Chang, D.S. (1993), "Reliability Evaluation from Nondestructive Accelerated Degradation Data", XIII World Conference on Operations Research, (Portugal,),
  51. Tan, R.K.R. and Chang, D.S. (1993), "Developing the Performance Indicators for a National Service Automation Program in ROC", XIII World Conference on Operations Research, (Portugal,),
  52. Chang, D.S. and Tan, R.K.R.(1993), "Confidence Bounds of the Weibull Failure Rate", 15th Annual Conference on Computers and Industrial Engineering, ( U.S.A ,Florida),
  53. Tan, R.K.R. and Chang, D.S. (1992), "The Formulation of Performance Indicators in Evaluating the Implementation of Automation", EURO XII/TIMS XXXI Joint International Conference OR/MS, (Finland,Helsinki),
  54. Tan, R.K.R. and Chang, D.S. (1992), "An Evaluation Framework for Measuring Business Value of Automation Investments", 2nd International Conference on Automation Technology, (,),
  55. 蔡文賢、譚瑞琨、張東生(1991), "農業自動化績效衡量指標體系之建立與評估", 中國工業工程學會八十年度年會論文研討會, (,),
  56. 譚瑞琨、張東生、蔡文賢(1991), "推動營建自動化績效指標之建立", 中華民國第四屆全國自動化科技研討會, (,),
  57. 張東生、蔡文賢、譚瑞琨(1991), "商業自動化指標體系發展之研究", 中華民國第四屆自動化科技研討會, (,),
  58. 譚瑞琨、張東生(1991), "Financial Analysis of Long-term Technology Project-A Markov Decision Processes Approach", 1991中華民國科技管理研討會, (,),
  59. Chang, D.S. and Tsou, C.S. (1990), "An Approximate Algorithm for Closed Queueing Networks of Flexible Manufacturing Systems", First International Conference on Automation Technology, (,),
  60. Chang, D.S. and Tsou, C.S. (1989), "Economic Evaluation Concerning the Investments of Flexible Manufacturing Systems", Third National Workshop on Automation Technology, (,),
  61. Chang, D.S. and Tsou, C.S. (1989), "A Simulation Study on Determining the AGV Required Number in Flexible Manufacturing Cell with Different Dispatching Rules", CIIE National Conference, (,),
  62. Tseng, S. T., Chang, D.S. and Wu, T.Y. (1988), "Selecting the Potential Manufacturing Process That Are Better Than A Control", IASTED International Conference on Reliability and Quality Control, (,),
  63. Chang, D.S., Chew, C.H. and Jan, Y.H. (1988), "Accelerated Life Testing and Reliability Analysis of Power Supply", 2nd Sino-Korea Quality Control Symposium, (,),

項次 主持人類型 執行起迄日 計畫名稱/計畫編號 補助或委託單位
1 主持人 2017/8 ~2018/7 發展系統性創新原則解決非核家園願景的結構性矛盾
NSTC 1062221E008069		 國科會
2 主持人 2016/8 ~2017/7 探討醫病關係、療效期望以及行為意圖在Donabedian醫療照護品質模式 (醫療結構-醫療過程-醫療結果)之中介效果
NSTC 1052221E008079		 國科會
3 主持人 2015/8 ~2016/7 整合DEMATEL方法評估雲端長照系統的TRIZ創新原則
NSTC 1042221E008046		 國科會
4 主持人 2014/8 ~2015/7 建構以差額變數為基礎之非輻射型標竿模式評估新決策單位效率
NSTC 1032221E008062		 國科會
5 主持人 2013/8 ~2014/7 發展衡量無形資本延續效果之動態資料包絡分析模式
NSTC 1022410H008036		 國科會
6 主持人 2012/8 ~2013/7 發展融入碳足跡之資料包絡分析模式評估企業營運效率
NSTC 1012221E008065		 國科會
7 主持人 2011/8 ~2012/7 利用融入組織學習效果之資料包絡分析模式評估MSW資源回收效率
NSTC 1002221E008096		 國科會
8 主持人 2010/8 ~2011/7 發展保證最佳典範具有卓越品質績效的標竿模式 -- 以老人照護產業為例
NSTC 0992221E008049		 國科會
9 主持人 2009/8 ~2010/7 發展多重對應關係之技術專利地圖：以薄膜太陽能電池為例
NSTC 0982221E008024		 國科會
10 主持人 2008/8 ~2009/7 搜尋多階多期動態經濟批量問題之最佳總成本曲線扁平區域
NSTC 0972221E008063		 國科會
11 主持人 2007/8 ~2008/7 考慮誤判成本之非對稱層別化資料包絡分析在二群體分類上之應用
NSTC 0952221E008064		 國科會
12 主持人 2006/8 ~2007/7 擁擠現象對台灣高科技產業廠商相對經營效率的影響
NSTC 0942213E008015		 國科會
13 主持人 2004/8 ~2005/7 利用層別化資料包絡分析處理兩群體之分群問題
NSTC 932213E008035		 國科會
14 主持人 2003/8 ~2004/7 衡量垂直分工生產體系之相對效率
NSTC 922213E008033		 國科會
15 主持人 2002/8 ~2003/7 衡量ISO認證廠商達成組織利益之相對效率
NSTC 912213E008051		 國科會
16 主持人 2001/8 ~2002/7 衡量對數常態分配之平均殘存壽命
NSTC 902218E008004		 國科會

項次 獲獎年度(西元) 獎項名稱 頒發單位
1 2018 特聘教授 國立中央大學
2 2017 特聘教授 國立中央大學
3 2016 特聘教授 國立中央大學
4 2015 研究傑出獎 國立中央大學
5 2014 研究傑出獎 國立中央大學
6 2011 講座教授 國立聯合大學
7 2010 特聘教授 國立中央大學
8 2009 研究傑出獎 國立中央大學
9 2007 品質論文獎 品管學會
回本系成員列表
  1. 回首頁
  2. 本系成員
  3. 專任教師
  4. 張東生
老師登入 　Copyright © 國立中央大學企業管理學系 All Rights Reserved. 國立中央大學隱私權政策聲明